Build Daily

Construction Site

August 12, 2017 18:06

Divide the living area of ​​interior partitions made ​​of plasterboard

click fraud protection
Divide the living area of ​​interior partitions made ​​of plasterboard

Interior plasterboard partitions allow to divide the living space in the comfort zone.

redesign of an apartment or house with interior partitions can be accomplished in a short period of time.

As they say - no dust and noise.

Indeed, in the process of building material will be used, the work of which is available to anyone who wants to own hands to transform their own homes.

result of using the drywall can be seen on the proposed picture, and at the same time to evaluate the work of young designers.Perhaps these pictures will awaken your imagination and the creator.

Contents:

  • design and the possibility of using room dividers
  • Mounting frame construction for walls
    • We count the number of required material
    • device PN frame profiles drywall partitions
    • Formation doorway for plasterboard partitions
    • Mounting rack profiles
  • lining of interior design plasterboard

design and the possibility of using room dividers

attractively executed interior walls of plasterboard, harmoniously flow into the interior of any space.For example, it can help to be divided into zones and lounge room.

Or reschedule dressing room, smashing room on seasonal basis.

installation of interior walls in the kitchen, will provide a functional area and resting place, as in the photo.

Zoning cuisine

In addition, in a corner of the kitchen, through the installation of drywall partitions, you can easily organize a small pantry.

If a small bathroom to clean the internal dividing wall, that will be able to get more storage space.

In this case, made with his own hands plasterboard partition will separate the shower from the toilet.

Since the second door is no longer needed in the bathroom, in their place, you can build a functional niche, using all the same versatile material - plasterboard.

Design baffles with smooth lines and precise geometric shapes, as in the photo, in conjunction with light, will make its innovation in the familiar interior.

Photo:

In this design each set in an apartmentinterior partitions easily done in the original style.Due to what the standard room to be transformed beyond recognition.

Interior walls in the nursery, where there is always a need to change the design of the room for the better, will be very useful.

Constructions of drywall will not only divide the bedroom and play areas, but also to make the project walls, the design of which would include decorative shelves and niches, a toy or a book.

wonderful example can be seen in this photo.

Photo:

Novovozvedennye elements differ in thickness and varied forms of design.

Plasterboard partitions can be radiused, semicircular or arched, solid and with all kinds of openings.

equipped with sliding doors, decorated with colored glass or mirror inserts.All these nuances are able to provide any room a special decorative effect.

attractiveness of space can be estimated at the photo above proposed ideas.

Mounting frame construction for walls

For the construction of the future partition will need a metal frame, it is going to own hands with rack rails and metal profiles, which are then sheathed with sheets of drywall.

Additionally, the design capacity for the sliding door, which is also being built with his own hands.

device room divider from sheets of drywall will require the use of the following list of materials and tools:

  • profile (rack, the guide);
  • laser or water level of the building;
  • plasterboard for walls - thickness of 12.5 mm;
  • insulation;
  • acrylic sealant;
  • stucco;
  • rubber sealing tape;
  • serpyanka;
  • plummet;
  • roulette;
  • hammer;
  • cord trace;
  • screws, dowels, nails, hammer.

Rack 50x50 profile will be set with an interval of 40 cm, is not considered doorway.Mounting

PS is usually carried out by the hands, with a standard length of 60 cm, but in this case 40 cm - is selected to make the reinforced structure.

Frame for partition

Guide 50x40 profile is used, taking into account the future of the perimeter walls.

The total thickness of the structure will be 75 mm, for its construction can also be applied PS - 65h75, 100h40;Mon - 100h40, 65h75.

We count the number of required material

Calculation of the material is carried out on the basis of the overall size of the mounted room divider.

To make it easier to carry out calculations and the subsequent installation of structures, it is possible on a sheet of paper to draw their own hands scheme.

In the drawing, you must mark the place of installation and the door to indicate the size of its opening, as well as places where you will carry out installation of rack profiles.

also need to draw cutting drywall sheets.

If the ceiling height of the room where the installation is carried out room divider, exceeds the height of a standard sheet of drywall (1200h2500 mm).

necessary to make cross-jumper from Mo, and spend their installation in areas of drywall docking.

device profiles PN frame plasterboard partition

Before you build a metal frame room divider, spend layout of the working area.

To do this from the main wall note right away - it will be the width of the room, then on the side walls of the carrier is carried out vertical lines.Supervise vertically using a spirit level.

Using paint the cord, you must also make marking lines on the floor and on the ceiling.

Video:

Before starting the installation of profiles, they need their own hands glue sealant that will ensure the integrity of the partition.

With the help of the drilling tool and the dowel-nails collected carcass construction of the guide profiles, which are fastened to the floor and the ceiling in accordance with the drawings.

on the future site of the door left a gap, the size of the doorway.On the side walls mounted rack profile.

To fully understand the workflow, be sure to carefully review the proposed photo and video materials.

Formation doorway for plasterboard partitions

Next, you need to make the installation of the door opening.PS and PN Profile connect with each other, are fixed using screws.

picked up the wooden beam to the desired size, you can make your own hands additional reinforcement strut members.Ready opening is attached to the guide at the bottom and at the top of the structure.Next

between the uprights of the opening at the top to do the jumper.It is made from cross-member segment Mon.At the same time it should be longer than 200 mm wide door opening.

Mounting rack profiles

used rack height profile is measured 10 mm less than the height of the room.In order to make the structure more solid mounting rack profiles carried out with 400 mm distance.

Rack elements set at the bottom and at the top of the structure in the rails are fixed with screws.Above the doorway of the rack mount additional profile.

transverse jumpers installed so as for the door opening of interior partitions, but in certain areas between the vertical construction elements.

Their device will allow qualitatively to execute the horizontal joints between the product sheets.

mounting frame of interior drywall is finished and we can proceed to the process of plating.To supplement the above allow the following thematic video.

Video:

lining of interior design

plasterboard sheets plasterboard mounted on the frame in a vertical position, the basic rules are respected.

First of all, the installation of sheets is recommended to leave a gap 1 cm - between the building material and the floor;0.5 cm - between the sheets and the ceiling;2 mm - drywall seams in place.

order not to break the strength of the construction of the partition, you should not do cruciform joints.

Begin lining the outside walls from left to right, on the reverse side - the inside - it is necessary to carry out trim from right to left.

That would eliminate the overlap on a single rack design butt vertical joints.

That said, first one side of the veneer structure with sheets of drywall, which is fixed to the profiles using 25 mm screws with a distance of 250 mm.

Then the interior of the structure walls filled with sound- and heat-insulating material, it can be a mineral wool (thickness 50-100 mm).Its

if necessary is laid in multiple layers.

to the insulating material does not slide down, construction of interior partitions, you must first provide direct hangers, then use them to put a heater.

At the final stage of veneer sheets drywall inside of the walls.Using a mixture of plaster and reinforcing tape sealed butt joints between the products, as shown in the photo.

To strengthen external corners room divider door opening reinforcement is used, which is carried out by means of a perforated corner profile.

Surface Finish room divider processed primer, followed by a large-scale plaster and finishing novovozvedennoy plane.It is necessary to equip the door design.

At the end of the article we offer a thematic view the video material.

Video:

instagram viewer