Wooden blockhouse - finishing in the best tradition

manufacturing wooden block house

Made block house made of logs on the basis of the cut "square in a circle."The inside of the timber, and it is immediately ready timber can be used as a building material or to saw a few flat boards.External parts are for the manufacture of a block house.After cutting the material to be treated to give it a basic moisture- and heat-resistant properties, appearance.Processing includes the steps of:

1. drying.It is important to withstand the humidity level during drying, the material is not cracked or deformed.Therefore, drying is carried out in a special chamber at a humidity of 12%.
2. Fit geometrical parameters.Next, the blank wooden block house are sent to the cutting, where the customized size, which must comply with specified standards.At this stage, as the longitudinal grooves are cut for a tight junction with the decoration, the grooves on the back side for ventilation inside finishing.
3. grinding, inspection and packaging.At the final stage of preparation sanded after pass quality control.Then, after passing inspection, block house remains sealed in foil for storage and transportation.

The result is an excellent finishing material with a method of fastening together tongue and groove.It should be noted that to improve the quality of the final material after drying in a chamber the wood is impregnated with special solutions, contributing to a longer service life.

Pros and cons of the wooden block house

At this point, you can start with the negative qualities of the material, as there are only 2. The first - the need for regular visits to a couple of years to make antiseptic treatment, the second - a relatively high cost in comparisonwith competitive finishing materials (such as siding for the exterior trim and drywall for interior).

now turn to the advantages of using a wooden block house in the finishing:

• Creation through natural breathable materials, pleasant, beneficial microclimate for the health.coniferous trees help reduce the number of harmful microorganisms in the air
• Finishing block house will not be difficult with the knowledge of basic principles and schemes, as well as a small experiment, so spend trim can own that much could save money
• The simplicity of mounting costs are reducedtime, installation is made with good speed
• sound insulation properties of wood are a significant advantage in finishing
• insulation and the ability to "breathe", coupled with previous positive feature are the main the choice between finishing materials.This is easily explained by the fact that in the house with wood trim is relatively long kept warm during the cold season, and in the hot summer days in the house preserved the cool, fresh air.And with good sound insulation turns cozy, comfortable atmosphere in the house.
• And one of the most important - appearance, which creates in interior decoration cozy, relaxed atmosphere, and at the outside - kind of solid wooden frame.

Selection block house

Choose type of wooden block house must be based on the conditions and place of finish.After all, for example, to finish the fence, you can pick up a block house of a cheaper, but resistant timber, and the room will be a good selection of more expressive, beautiful, high-quality wood.

For the manufacture of wooden block house is used mainly conifers, such as larch, pine and spruce.Also under the softwood harvesting take aspen, linden, birch.For interior decoration steam rooms and sauna is perfect lime, since it has low thermal conductivity compared to other breeds previously submitted.Quite expensive, but more solid, beautiful and dolgosluzhaschey in this regard is the larch, which means it is it will be wise to spend at the interior decoration of the room.

unpopular, but has a high rate of moisture resistance can be called alder.Not for nothing it is used in the construction of piers.This breed of wood can be selected when high demands to the property of moisture resistance.The most common in this environment is considered to be pine, block house made of pine is relatively cheap and it's not hard to find.But it does have one drawback, this selection of resin.Over time, the material begins to be covered liberated resin droplets which appear in the area not aesthetically pleasing, and that does not allow its use in interior decoration.

installation process

Before installation it is necessary to check the condition of the walls.Namely -check walls for cracks and chips.If defects are detected, they must be eliminated.Otherwise, under a layer of insulation and a wooden block house on the frame, the walls will continue its process of destruction.There is this unfavorable process in this order - the detention of the moisture in cracks, freezing of water in cracks in the winter, expansion slots, progressive and confident destruction of the wall structure.After checking

insulating material layer is laid, it is created by a framework of vertically spaced bars 35 to size 35. The batten bars can be fastened to the walls on both simple nails, and for special mounting brackets.

Note.Before buying insulation, define frame sizes, namely its thickness to acquire the appropriate size insulation material immediately and there was no need to cut the sheets over the entire area.

Before installing the liner in the crate, be sure to treat the plate wooden block house with antiseptic solutions to prevent the occurrence of mold and rot.Now you can proceed to the installation on the frame.

methods of fastening wooden block house on the crate

There are several ways to mount the lining, so you will need to decide on a method based on their preferences and installation conditions.In the process of choosing a method, you must first consider the importance of this work, as well as to adequately assess their own skills and abilities.

1. Fastening clamps.-Clamp - galvanized latch plate is inserted into one end of the groove, and the other is attached to the frame.Once inserted into the next plate is installed in the first slot, clamps the first plate is no longer visible under the finish.This plate is mounted well, and all the follow-up to this principle as the wall will not be blocked by facing up to the end.

   

   This method of fixing a wooden block house creates a pretty strong structure, it does not show any trace of the installation.

   

2. good and quite popular method is to use liquid nails as a preservative.The main advantage is that there is no need to use conventional screws or nails.Thus, the risk of damage to the plates of the wooden block house is practically reduced to zero.
3. This installation option is the most difficult, as it will need to spend a relatively large amount of his time.Its essence boils down to the fact that the panel block house attached securely enough to the crate.First, the material needed to make a hole approximately half the total thickness of the strap, and wherein the diameter should be the same as the screw diameter of the hat.Then the screws "recessed" in the plate and close shkantami.This wooden plugs, which after installation will have to be thoroughly sanded.More convenient to use instead of toothpaste tubes, which would correspond to the color of wood.With this method creates a good protection trim components from moisture.
4. especially the latter method is to use galvanized nails.The nails are hammered into the panel, you will need to comply with an angle of 45 degrees.But there is a greater risk of damage to the material, and in that the main drawback of the method.

   

Conclusion In summary, we can conclude that as in any job, we can not rush to do everything step by step, and with the expectation of a large proportion of care.With self-finish wooden blockhouse invite an assistant or even several.It is important to provide all that there is no extra cost for materials and finish dates are not stretched in time.

not occur in a particular problem approach is to focus on this, and then the work will go smoothly, and the result, respectively, will delight you with its quality.