Tapestry with their hands

Let's see how to make a trellis in the country with their own hands.It is a wooden lattice, which can be used for fences or pergolas and terraces as a support for flowers or grapes.Despite the fact that at first glance do it quite simply, it is not rare without a practical example of the first time make it fails.Therefore, we consider the process of making tapestry fence in detail.

Training materials

Tapestry is quite simple and is performed with improvised tools.You will need to rake thin, handsaw, miter box and screws.After manufacture, the product can be coated with paint or varnish.

most difficult process is to rake has been placed at the same distance from each other and at the same angle.As a result, you should get a plate with diamond-shaped openings, fixed wooden foundation around the perimeter.

Tapestry for climbing plants with their own hands is made of pine wood slats.

Manufacturing garden trellis

main objective is to connect the right two slats crosswise.This is best done with the help of the bar with a square shape.Shifted in the rail and using the bar as a dimensional material, you need to fix a few strips on the entire length of the horizontal track.Moreover, they must be fixed with a shift as shown in Fig.Proper offset rails is done with the oblique guide, which is attached to the main angle of 45 °.

By the same token attached remaining slats, then trellis is almost ready.

remains to fill in the corners.This is done on the same principle, is used only for angles smaller length slats.After finishing work trellis for the garden is secured with bias bar (perhaps a greater thickness) and is set to place his plan.

In the manufacture of wooden trellis it will take only a few hours, even a half-day of painting or varnishing.After that, they can be used for other purposes.

In the example above, the main guide, you must fill offset rails 9, then perform similarly to fill the entire plane.Trim trellis will be using with bias rail that is located at an angle of 90 ° to an additional guide.The angles on each side are filled with three wooden segments of shorter length.In conclusion, stuffed rack on both sides of the edge of the tapestry on the perimeter - and fencing for the garden after varnishing or painting is completely ready.

Photo trellises for climbing plants

Photo source: shpallery.rf

Species Tapestries depend on the goals of the selected rail and attachment method.If massive rake thickness of about 2-3 cm will be used, the proposed tapestries option may well be fence garden, gazebo and even garden plot.Rake a minimum thickness of 1 cm is used for the manufacture of trellises for grapes.These devices can protect plants from sun and wind, serve as a decorative element of the plot.Their use is very wide, it allows to organize the section while not disturbing the air.

In conclusion, it is necessary to give some advice on landscape design.Light trellis in a garden used for climbing flowers and shrubs.This device can be mounted on the wall of the house, next to the beds, it will give an opportunity to attach to the wall of plants and beautifully decorate the wall.These tapestries are appropriate on the south side of the house where they are sufficiently covered, and the flowers buds are turning to the sun.How to decorate your infield trellis fences, see detail in photos and videos.

Video assembly trellis