Build Daily

Design

August 12, 2017 18:06

Search of water at the site for a well

click fraud protection
Search of water at the site for a well

How to find water on the sites for the well - a very important issue for many people.Imagine a private land without water is impossible.

It is necessary for domestic purposes, for irrigation, for technical needs.Even if only in the territory of the court building is planned, it is impossible without a large amount of water.

is therefore often necessary to dig the well as quickly as possible, but not everyone knows how to do it correctly.

main task - to find a place that is ideal for the well.

But on the site, using the means at hand, not so easy to determine where underground is living with water to the well.

However, we live in a time when there are so many ways to determine the water on the ground.

These include technology and, with the use of special techniques and methods, and grandfather, based on observations and improvised means.

To be sure, not even possible to use one, but several ways.Then you can immediately obtain the necessary resources without any problems.

Contents:

  • to ground and depth
  • search through test drilling
  • Alternative search techniques
  • Traditional search methods of water

to ground and depth

All the land you can imagine how the alternation of differentsoil layers.Some of them are easy to pass water and contain moisture, others - almost impenetrable.

hold water impermeable layers, which frequently consist of clay or stone.there is a layer of sand, and which maintains a clear liquid between.

occurrence of water

When looking for a place under the well can be found mine at a depth of several meters.Such water is called the vadose, and it is not used in everyday life, because it contains large amounts of impurities, melting snow and rainfall.

Furthermore, such fluid is exhausted in the upper layer quickly.In this drought has dried well in the area for a few days in the summer the water from it may even disappear.

To find the right vein, it is necessary to choose the depth of about fifteen meters.That there is a layer of the continental sand, which contains pure moisture in large quantities.

sand also serves as an excellent natural filter, which cleans the liquid from the mud, rain and debris.

search through test drilling

asking yourself the question, how to find water wells, you must always assess the opportunity to drill.

for cottage or private home - this is the best option, which allows you to take into account parameters such as the thickness of the soil, water quality, the depth, place the rocky rocks, costs for construction of wells in the area.

Spend it with a manual or automatic drill.

first drilled so-called pit from which the soil is removed.Next on the degree of humidity of rock can be determined at what level is the most water.

In addition, drilling rigs can carry out even the withdrawal of water from different layers in order to assess its quality and purity.

Drilling of wells

However, this method is not satisfied with all the people living in the area.

shoveled earth spoils landscaping.In addition, the deposits do not choose the place for the occurrence, and it is actually dig a pit on the access road to the house.

therefore often choose other ways of determining the place of a well.

Alternative search techniques

often to find water and a place in the area under the well, use a variety of non-contact search methods, which do not allow to spoil the terrain.

For example, you can use balls made of silica gel.They absorb moisture, so ideal for searches.

Of silica gel beads

right to conduct technology as follows:

  • first fry the balls in the oven;
  • Thereafter, they are divided into equal portions and placed into tissue nodules;Next
  • such nodules need to dig in the area in places where it is assumed construction of the well;
  • When will a day, you can dig up the bags and weigh (for simplicity, we can weigh them up, in order to clearly see the difference).

It is clear that the most difficult portion will indicate where the most water.This method is good for the garden, where accuracy is not as important and you need to dig a small pit.

To define more precisely the place in the tank, there are other ways.For example, you can use the barometer.

To use the device, it is necessary to make control measurement - always on the bank of the nearest pond.

You can then make measurements directly on the site, measuring the pressure.

So, the water level is determined by the difference in pressure drops areas.

also possible to find a place in a well on the site, using the framework method.

method framework

sufficient to find two aluminum rods about thirty centimeters long.They are bent at approximately a right angle of ninety degrees.

right to insert the metal ends of the cavity in the wood, for example, using a stick or rod without a core.

It is necessary to be able to comfortably keep the structure without affecting it, because it is essential to do as little as possible of unnecessary movements.

To move the sticks yourself, elbows tightly pressed against the body, and his hands held at a right angle.The two sticks held in the hands and slowly go on the site, trying not to make any sudden movements.

So, if living under the ground is on your left, the wire turns in the wrong direction.If the right - in the right.If you stand directly over the vein, the ends of the wires must connect.

Video:

Traditional methods search for water

Do not neglect and trivial observation, which can tell you where to equip a well on the site.Simply inspect relief to already draw conclusions.

So, if the site has pits and ravines - a good sign, indicating the different layers of soil, and the possibility of occurrence of water.

also ordinary plants will help to identify the location of underground wires.

For example, trees and shrubs that like moisture will not grow where there is no water, because their roots banal nowhere to take liquid.

example, said of the hidden water can be a significant thickets of beech, acacia.If the site has a reed or willow - it's a great sign, because such plants can grow only at high soil moisture.

But apples and cherries do not like excess moisture, so if you notice them podgnivanie - a sign of the presence of wires.Good signal - nettles, alder, wormwood.

Finding water on plants

Also, if next to the plot there is an industrial water intake or the river - there is almost one hundred percent guarantee that the site will be a good source of water.

If the country or in the yard of a private house at a particular location is constantly formed fog, it is also a sign.In addition, animals are also perfectly feel the underground temperature emanating from the core.

For example, dogs can often lie on the ground where you want to place a well.

constantly climbing poles midges and mosquitoes - a good signal.

If you observe nature at its own site, we can see a lot of indirect evidence, but it does not mean that you should immediately begin to costly digging a well.

It may also happen that in place of the water will not.

Fog on the site

all folk remedies should be seen more as a signal that you need to check.For example, using conventional cans.

To do this, it is necessary at dawn, during the formation of dew in the prospective field positioned glass jars, so that their neck was pressed against the ground.

The next morning, just look at what the bank has accumulated plenty of fluids, to figure out where to dig the well.

If the hand is not a silica gel, you can use bricks and salt.

podgadat only important moment will be dry weather.

brick divide into crumbs and mix with salt.The mixture is wrapped in cloth and tied and buried in the ground where there may theoretically be water.

A day dig bags and weighed.The biggest difference in weight indicates the estimated location of the water veins.

instagram viewer