Stove heating water circuit in a private house

Heating furnace with a water circuit: variety

owner, plans to put in a furnace with a water circuit must be remembered that upon the occurrence of frost it is necessary to heat their consistently.If you miss a few days of frost, the coolant freezes.Homemade furnace devices are brick, cast iron or wood-burning.

brick oven with a water circuit

If the oven is already available, a special bookmark this design does not require.It will be enough just to install a special hot-water tank.That it will provide all of the coolant system.This is quite a simple design can overpower anyone who wants to make their home more comfortable.

Make the tank to heat the water from the steel sheet, which must withstand the aggressive environment and the internal heat.The wall thickness of such a tank should not exceed three to four millimeters to provide adequate conductivity.Thicker walls are heated longer and hence reduced efficiency.

for brick kilns there is no standard size tanks.Each tank is made for a particular furnace and calculated by its size.This adjustment distance should not be less than 400 mm: it will provide free access.When calculating the length of the tank is taken into account the required amount of coolant.

cast iron oven with a water circuit

Cast design have their own benefits.First, the thicker walls of such a furnace burn much slower (compared to steel).Secondly, the lower heat dissipation metal, so the heat is retained longer.

accumulation of heat iron furnaces at eight per cent higher than that of steel (for the same weight).This is because the higher specific heat of iron.The heat transfer coefficient of the alloy and a half times higher, which means that heat is transferred quickly from the device.For heating water in the heating system it is important.

Modern cast iron stoves often have a water jacket made of stainless steel.Interestingly, these structures are not embedded in the foundation floor or walls: they are portable and adjustable feet.

Professionals recommend before starting the unit, be sure to check that the expansion tank has been filled.Run the iron furnace with a water circuit is strictly prohibited to the shortage of water in the system.

woodburning stove or oven with a water circuit Buleryan

heat their furnaces Buleryan exclusively wood: other energy carriers refuses to work.

This design - a horizontal cylinder, separated by a partition.The lower part is used for firewood and to create the necessary temperature.And the upper part - for the remaining products or burnout pyrolysis gas.

Firewood in a furnace does not burn and smolder.This one load is usually enough for 10-12 hours.Resulting from the combustion of pyrolysis gas, carries more energy than the wood itself: the air in the piping tubes reaches 120 ° temperature.

Buleryan with a water circuit must have a chimney or a good ventilation system.Otherwise, they become life threatening.

recommended for safe operation of air ducts cleaned by soot and condensate at least twice a year.

oven fireplace with a water circuit

oven fireplace with a water circuit can be easily mounted to any central heating system.In operation, the fireplace through the water circuit gives heat to the central heating system.This can significantly reduce gas consumption: energy consumption can be reduced to a minimum.

Furnaces with water circuit generally have good reviews.However, deciding to establish such an oven at home, consider the characteristics of the dwelling and the climate of the region where you live.