Connecting the electrical panel of the cooking yourself

Do you have a need to purchase the hob.After the purchase is the connection becomes one of the problems.First of all, you need to carefully read the manufacturer's instructions, if you connect, for example, the Bosch company hob or another brand. Connecting electric hob self first need to start with in order to install a properly grounded outlet.In addition, you must have a terminal adapter and a cable with a cross section up to 3 mm.And the cable and clamp need to be purchased separately.

You must first turn the hob and remove the cover of the connector.With a knife we ​​clean the cable ends.After that, you need to determine where is the mass, and zero phase.To do this, prepare in advance a tester.

Bosch brand is very popular among consumers.High-quality equipment in terms of installation and operation is simple and straightforward.Here, everything is thought out, which is why the installation of equipment and the connection does not require much mental exertion.Bolts constructively so arranged that do not require any terminal.Just bolt wrapped in half a turn, and then his spin.After all the manipulations twirl contact cover.

That would be like and all on the question how to connect an electric cooking plate.It should also be borne in mind that if you buy a separate connector, it is sure to be the production of China.Typically, such connectors are of poor quality and not assembled properly.Fasteners connectors such poor quality.

Power

When connecting the hob particular attention should be paid to electric power.After a short period of time stove heats up, which is very convenient.However, for all the passes pay.Due to the high rate of heating electric power consumption is large enough. Sometimes she comes to 7 kW .Therefore, the cable more demanding.Especially it concerns the supply contacts hob.In order to minimize the contact and reduce the possibility of short-circuit power can be fed directly to the terminal surface.The main requirement for the cable - is copper with a diameter of at least 4 mm.

Wiring electric hob

If the plug is ready for connection in advance, then connect yourself tile is not difficult.It is much harder to deal with switching cables suitable outlet.For example, the cooking surface extends from four wires, while in the wall there are only three.so it turns out that the hob has two phases, and the apartment has only one.

necessary wires black and brown the surface of the string together.Then twisted wires need to be connected to the flat phase.Usually this is carried white.Grounding conductors in this case remain free.

Video connection hob

For clarity, we offer watch a video lesson to connect the hob.