Gun the gas installation and other interesting models

Why do you need a gun mounting gas?

Any thing can be used for other purposes, and thus it will perform the task at the appropriate level with a certain skill, in whose hands is.For example, a gas gun assembly used to create a kind of master of plywood with nails driven into reproduction "Mona Lisa", but this self-indulgence.In fact, this tool is to a large extent facilitates the work of those who have during the construction and repair works hammer thousands of nails a day.

Imagine that you need to drive the dowel in the concrete, to secure, for example, the battens.Even wielding a heavy hammer, you're unlikely to be able to score more than a dozen nails per hour, and a pneumatic fastening tool in the same period of time to inject several hundred dowels.In fact, to date, this type of installation tool is the most popular, because the continuous supply of gas makes it possible to use semi-automatic multi-charged models FIFO. Mounting piston gun is used for driving nails up to 160 millimeters in wood, concrete and metal .

Powder actuated fastening tool - the principle of firearms

If you dream of that, if not feel the shooter with the Wild West, or at least hold a weapon in their hands - a powder actuated fastening tool will turn in a desired reality.It all firearm: rechargeable cartridges, recoil, the smell of gunpowder and impressive result.But let's look at the whole process of work a tool in stages.

Start, perhaps, it should be with the fact that current models of all without exception are equipped with fuses that can be unlocked only resting a gun to a point intended for nailing. Earlier models of the lock did not and could shoot like a real weapon, which often leads to accidents and intentional infliction wounds.

holders under the gun construction and installation are available with the same caliber and different sleeve lengths (and therefore with different charge levels), respectively, characterized by their power.Fighting among them you will not find all of them, without exception, blank.However, in case of failure the tool, even in the absence of a nail in the time of the shot can be knocked piston that will take off from the "trunk" with speed and destructive power of the bullet.

Sometimes charges for firing tools nails collected in the tape, with the result that the work becomes like a machine gun.

The cheapest model - single shot, but it is possible to find budget and domestic semi-automatic pistols with a cluster of shops, such as the Tula arms factory.Fixing the stores are set to 80 mm, which, of course, be compared with pyatnadtsatisantimetrovymi carpentry nails, but also quite effective.Plugs are of two types - normal and with a hat, in which there is a thread.The second type is designed exclusively for collapsible structures.

electric fastening tool - full autonomy

course, nails when working with this tool is not clogged by force of electric current.Just in constructions of this gun battery is present, which, along with the compressed gas tank, allows you to work in the field without being tied to a stationary power source.For example, all the mounting guns operate at major construction sites, being connected to the compressor installation, which in turn should be near the current source.

the rest, nail tool, powered by electricity - a professional installation gun with combustible gas, which, acting in batches in a special chamber, mixed with ordinary air, and ignited a spark.The power of the explosion in a kind of internal combustion chamber is such that the piston pushes a nail with great force, and he breaks even thick metal beam.

Before mounting choose multiply charged pistol, find out how accessible are the nails for him, as some sizes are scarce and are extremely expensive.You may encounter a situation where the nails will be sold exclusively tray on which there are about 140 thousand "charges".However, a trip abroad for the purchase of consumables can be even more expensive.