Build Daily

Construction Site

August 12, 2017 18:06

The process of repair of the soft roof with his hands

click fraud protection
The process of repair of the soft roof with his hands

repair soft roof - a complex process, which is carried out when the roof membrane is damaged certain facilities.

It involves a set of operations aimed, as a rule, on the elimination of the current roof of the building defects.

Thus experts conventionally divided damaging the roof membrane into two types:

  • Cosmetic (when cover damages are less than forty per cent);
  • capital (if the damage amount to over than forty percent of the total area of ​​the roof structure).

repair soft roof should be carried out with the implementation of all requirements, since his task is aimed at eliminating the causes of roof leakage, made by using the soft roll of building materials.

Over time, any such roof collapses bituminous layer, which provides waterproofing properties.

Therefore, experts advise during every two years to check the facilities for cracks and other defects.

Otherwise - you can start the process before the water flow into the room, which is fraught with additional costs for repairs.

Contents:

  • How do you know that the roof needs to be repaired?
  • Preparations Manufacturing
  • mixture
  • main works
  • Summing up

How do you know that the roof needs to be repaired?

How do you know it's time to repair the roof?And what are necessary for this material?

As has been previously stated, before embarking on any roof repair is necessary to determine whether it has been damaged.

Defects of a soft roof

To do this, you have to climb on it and do some research to determine the level of coating deformation.

Particular attention should be paid to places of overlap, as well as web connection.Here you can discover the visible peeling.

In such a case, would be sufficient to carry out cosmetic repairs.It is more difficult to work with surfaces, where there are troughs and pits.

For some time they can hold water.

However, it suggests that soon the moisture will flow into the room.

In this case, no longer do without a major overhaul.It is advisable to immediately check for rotting material.

It will assess how quickly you need to proceed to the repair operations.

If the roof you see swelling, it means that the moisture has managed to seep inside.About as dangerous as possible mechanical damage.

Preparations

Determined to repair the roof of the garage say, you have to start with the preparatory work.

At this stage repair of soft roof with his hands involves cleaning the surface of the object from the debris, dust and mildew, if there is one.

Removing the soft roof

After that dismantled the old layer of mastic.If possible, it is best to dry the object.Thereafter, to work on the basis of what are defects.

If there are blisters on the roof, you should begin working with the opening cross-notch.

This spill area can dry out thoroughly.

After removing the old building material need new sealant for repair of roll roofing.Then, defective roof should be placed on top of the liquid rubber.

necessary to ensure that tires firmly cemented to the base of the roof.Thereafter, the patch is covered with another layer of mastic.

All of the above - this is the technology of cosmetic repair soft roof.

Overhaul current flat roof is considered to be more expensive.It involves the complete dismantling of the defective roofing roof, after which the surface and dried.

In some cases, there is a need in the implementation of the screed, providing additional paving.

For this, we also need a mastic.Thus it should be more layers.

This option is finishing the roll roof is more expensive due to the fact that after cutting the old flat roof need to spend more effort and time to object disposal.

Video:

This option also includes a number of measures aimed at warming the garage.

To perform this task today, there is a great abundance of building materials.At the same time the most appropriate ones for thermal insulation of the roof is considered to roll foam.

This is due to excellent thermal insulation properties of the material.However, the foam is different and more affordable cost relative to other options.

Manufacture mixture

in the preparatory work we have a little touched a topic related to laying the top layer of the roll platform.For its installation suitable bitumen-polymer materials liquid form.

An integral flexible coating materials able to withstand significant mechanical and thermal deformation of the base.

However, you should know that the sealant with a liquid rubber can be used in cold and hot conditions.

Cold mastic - roofing felt and bitumen used for laying the inner layers of a flat roof.

hot mastic - tar and only typically used with liquid rubber coating for external flat surface.No other materials in this case can not become an alternative to them.

However, the implementation repair their own hands mastic asphalt can be made independently.

Video:

This will help you a special statement.You should be aware that should be kept special temperature when mixed with bitumen filler.

Any statement (statement) for the production of cold mix bitumen involves heating up to one hundred eighty degrees.In this case, the bitumen the water evaporates completely.

After this mass must be cooled and used for further work.Otherwise, get a faulty mixture - and flowing house you provided.

Statement for the preparation of hot mastic involves the use of the boiler, where it is heated to a hundred degrees.

This paste should be gradually supplemented by filler.In the process temperature should not drop below one hundred sixty degrees.

Otherwise you will get faulty mixture which in contact with the liquid rubber does not allow to achieve high-quality roll surface of the roof.

main works

Overhaul of soft roofing of today, many people make mistakes, guided SNIP - standards developed during the Soviet era.

This leads to the fact that they get a few wrong version of the roof, which would like to see.Also, many of the errors related to the fact that home craftsmen substandard materials are used.

Minor roof repair

These include the mastic, this also applies to liquid rubber, and other materials.

For this reason, the roof can not be done flat.Having on hand a modern knowledge and good building materials to carry out the work will be much easier.

With this you need to be confident in what you are doing.

It is important to understand that different statement implies the use of different materials for the roll roof.

For example, if you are interested in a facelift, and you are planning to follow a liquid patches, then it should remove defects only in the damaged areas of the roof roll.

Statement on capital repair involves the use of a liquid mixture - a full solution for the preparation of which we have spoken above.

Video:

This surface is flat to overhaul a soft roof should be carried out on a clean surface of the roll.

After applying a liquid mixture of a statement involves the use of a piece of roofing material.

important to understand that the materials used in this case should be much larger than the surface area.

edges when it is necessary to lubricate the special mastic asphalt, you have already made before.

After replacing the roof covering and the establishment of ties you have to do the replacement of the eaves.Current definitely not suitable.

successfully carry out this task alone is difficult enough.In any case, it will require a lot of time on the artist.

desirable that in this business you have helped friends or relatives who are familiar with the work.

Video:

After the implementation of this phase of the work must go to the replacement of old aprons contiguity and fences.

usual difficulties do not arise in this problem.But in the repair of drains a lot of people make mistakes.

At this stage, the work does not need to hurry.Do all things gradually and consistently.

capital Repair Garage type of soft roof also includes the replacement of vodoproemnikov.

Summing up

Thus, repair of soft roof can be both cosmetic and capital.

In any case, this involves the use of special equipment, availability of materials, as well as compliance with the instruction (manual).

You must perform all operations consistently and without haste.

Thus any mixture can be made independently.It is important to take responsibility not only to the basic work, but also preliminary preparation of the coating.

If all these points are met, then you will definitely be able to successfully carry out the replacement of the old cover of the garage roof, or other structure.Good luck, my friends!

instagram viewer