Warming bath inside their own hands

owners of suburban areas, where the pair erected probably wonder how warm baths inside their own hands to stay and relax in them can be truly comfortable in any season.

As you know, today bath made from a variety of materials, all kinds of designs and shapes, but in each of them seek, primarily, to provide effective thermal insulation.

It is high quality and good thermal insulation of the interior is a prerequisite for any such structure.

brick, frame, built of lumber, cinder block or bath foam block can insulate both outside and inside, but many experts recommend to carry out all the work is in its inner space.

course, provide effective insulation should every room in the bath, but first of all it is necessary to pay attention to the steam room.

insulation scheme may be very different, including with the use of different materials.

walls, ceiling and floor in the warm bath is best at the same time, using only quality materials for this purpose.

Principles insulation

To bath indoor climate was really good for your health, you need to properly equip its thermal insulationand it can be done both outside and inside.

Many experts recommend framework, brick, built of cinder block or any other block bath, insulate it from the inside.

Video:

Despite the fact that this process is quite lengthy and time-consuming because of the need to properly process the walls and ceiling, you can do all the work with his own hands.

This before all the work should be to properly assess their capabilities and become familiar with the works of technology.

choosing as insulation of any material in the first place should pay attention to its practicality and quality characteristics.

brick, frame, built of cinder block or timber bath, insulated on the same principle.

In any case, the inside walls and ceiling must be waterproofed and vapor, protected against fire and be safe environmentally.

Currently available in both natural and artificial insulation.

In the case where the insulation when the emphasis is on environmentally friendly, it should choose only natural materials such as moss, felt, hemp and so on.

It should be noted that if the walls and ceiling in the bath are insulated with natural materials, they should be pre-treated with special compounds to prevent later formation of mold, fungi, as well as the appearance of insects.

Some natural insulation can be seen in the photo below.A simpler option - is to hold warming bath inside with the help of artificial materials.

Photo:

Typically, these heaters have a fire resistance, good insulation and are not subject to the processes of decay and decomposition.

addition, their styling is simple enough to cope with their own hands.Artificially heaters can warm as a bath brick and framework, as well as those built of cinder block or timber.

Some artificial heaters placed in the photo above.For more information about how to insulate the inside walls and ceiling of the bath with his hands, told on video posted to this article.

choice of material

Before you insulate your hands from inside or outside the bath or a carcass built of cinder block or timber, should first determine the material that will be used for these purposes.

is necessary to pay attention not only for its natural and safe, but also to the appointment, as well as the appearance and, of course, price.

By mechanical characteristics all existing heaters can be divided into a variety of filling, blocks, plates, mats and plates.

heaters also may vary and some of their chemical properties.

Video:

So, there are organic and inorganic origin, tehnoutepliteli and insulation on the basis of certain plastics.Each of these materials has both advantages and disadvantages.

For example, those materials which are based on plastics are best suited for work outside.

In turn, those materials that are of organic origin, can be used only after special treatment.

more versatile and practical materials that have an inorganic origin.They are equally suitable for work inside a bath and outside.

For example, to insulate the steam room, it is better not to use foam and similar materials.For these purposes, you can use mineral wool.

conducting works on warming of the space inside the bath, do not forget about it, and a vapor barrier.The material can opt for roofing felt, vellum, and aluminum foil.

Many experts recommend to opt for the use in combination of mineral wool and aluminum foil.

Video:

These materials are well protected space inside the bath, fire-resistant and safe for health.

In any case, before the warm bath with your hands or a framework built from timber or cinder block, you need to carefully study the properties of each material and choose the best.

For more information on how to effectively insulate the bath, you can look at the video posted in the section.

Wall insulation

Typically, insulation is carried out in a bath complex, with several different components.

The most common pattern of warming bath includes simultaneous use of fiber types and insulation lining.

order to implement it, you need to start on the surface of the wall to perform a kind of frame in the form of timber battens.

Next in crate of timber stacked even layer mineral wool or similar material and carefully recorded.

After that is necessary to lay a vapor barrier layer, and for this purpose it is best to use aluminum foil.Next, the entire surface is sheathed fire-resistant lining.

This method of insulation inside the bath is the most effective and widespread.Its disadvantages include high labor intensity and duration.

Currently, you can find heaters for baths, which simultaneously combines vapor barrier and waterproofing properties.

Their use greatly simplifies the process of warming the bath and reduces the amount of work.These versatile materials may include, for example, foil penoter.

Video:

In the event that the wall in the bath are made of any panels, it is best to use the heaters, which have a relatively low weight, such as reed plates or Styrofoam.

In this case, they additionally have to handle special structures that will enhance the refractory properties.

Prefab wall surfaces in the bath is best to warm the special plates, created on the basis of fiberboard or reeds.

In any case, the use of heaters in the form of blocks that have the appropriate characteristics, facilitates the performance of work.

Warming ceiling

At the final stage of work on warming the bath it is necessary to insulate the ceiling right.

It should be noted that it is in the bath ceiling falls, the highest temperature, which means that only the flame-retardant materials should be used.

not recommended to use for thermal insulation of the ceiling inside the bath foam, which usually comes in the form of blocks and prone to burning.

In the event that room has a loft for the beginning of the ceiling boards should be treated with common clay, which will delay the moisture.

Video:

is followed in all the cracks between the boards from the attic to sleep tight or expanded clay chips.

also outside of the ceiling in the attic space as a heater, you can use the foam in the form of blocks, which should be firmly laid and sealed to all seams.

For those baths that do not have an attic, ceiling insulation scheme is slightly different from the previous one.In this case, the materials used should be stacked in layers.

For example, to start on the surface attached vapor barrier, followed by insulation and a layer of skin.

Procedures may vary, but in any case, the ceiling insulation bath technology must always remain the same.

During the insulation of the ceiling in the bath, special attention should be paid to the place through which the flue pipe.

in the joints it is mandatory to indent and separate the material from the surface of the pipe insulation.

In any case, it is necessary to warm bath inside only high-quality materials that have appropriate characteristics.

For more information about how to perform a warming bath inside, narrated in the video, which is available in the article.