The hatch in the basement with his own hands

If the structure has a basement, then do not work without a hatch or door.In this case, it will go about creating the hatch, with which it will be possible to get into the cellar.It is important to note that the quality made the door - it's a great mechanism, which not only saves space in the home, but also allows you to hide the presence of the basement.In some cases, it is very important aspects, many of which the owners and come.

it is also worth mentioning that the presence of a basement in a private home for many people is a prerequisite.Moreover, there may be things that a pity to throw away, so it is also a great place to store potatoes, canned and other foods.During the year the temperature inside the basement is approximately at the same level.

Features create hatch basement

important to note that the door should not only look good, but the best way to fit into the space, while also securely locked entrance to the basement.Probably the most basic requirement for the hatch to the cellar should be a simple opening mechanism.By itself, the door can be huge, but additional mechanisms should allow to unlock the passage, even with little effort.

Start the process of creating hatch

In this process, we need the following materials and tools:

• Area metal;
• sheet steel (up to 5 mm thick);
• tires;
• welding equipment;
• screwdriver;
• screws;
• roulette;
• Bulgarian;
• drill.

It is understood that the size of the hatch must exactly match mine basement.Otherwise, many problems may begin, and immediately after the detection of difficulties will have to start the process of creating the hatch from the outset.

also worth considering that the hatch must be so designed that the passage could easily hide flooring.Thus, the upper surface of the hatch should fully meet the level of the floor.At the same time we can not allow the design proved to be unreliable, as can be more than a dozen times to step on the door during the day.

Building basement hatch

In the beginning, we need to create a kind of frame for the hatch, which is perfectly integrated into the overall design.In this case, you should use metal corners.Accordingly, it is necessary to use welding equipment and to create a square (or rectangular) workpiece under the main part of the hatch.Here we will have a short period (a few millimeters) between the metal structure and concrete opening.His need to fill seals.It is best to use high-density rubber.It should be used as much as possible seal design to securely hold the aisle.

for hatch covers are made not only of metal, but also of wood.It all depends on what kind of material prevails in our home.If it is a wooden house, and the cover must be the same.

In our case, where we used the corners should cover a little treat so that it is well entered in a metal frame.If you look at the cover profile, top it should be slightly wider than the bottom.It is necessary to calculate the size (primarily the thickness of the metal parts) to hatch in the end, tightly closed passage.

In most cases, the hatch cover is put on the loop.This will greatly save power when opening the mechanism, as well as to ensure that the hatch density was high.

External loop can be purchased at any hardware store.They should match the size of the hatch.Some loop components are attached to metal corners, and the second - directly to the cover.In this case, should help screws and drill with appropriate drill bits.

Very often stops the gas used for such mechanisms.They have small dimensions, so that in the best way suitable for the hatch.With their help, open the heavy lid is much easier.To install stops, require special brackets, which are attached to the cover and metal corners by welding.

hatch basement power

Many people prefer full automation.Fortunately, to date a variety of mechanisms and tools cost is not as expensive as before.In our case, for creating an electric drive for the hatch, the piston rod is required, the electric motor, as well as a framework for fixing mechanism.

creation of such a hatch begins with the welding work, through which we will fix the piston.The framework will be a grid that is perfect to secure the hatch elements.The electric motor should be small in size and located immediately below the piston.It is to experiment with the arrangement of the piston mechanism, to supply a signal when the lid raised to full height, which meets the requirements.hatch hinges should have the highest quality, so that during the next opening they did not disappoint, and the design does not hurt.

Toggle switch for the trigger mechanism must be nearby.Wires should be hidden in such a way that during the opening or closing of the hatch is not pressed.

This is just one way of thousands of ways to create an automatic hatch opening system.

Other features create a hatch to the basement

It is said that in most cases, the creation of such automation is not something important.The most common small hatches, which can be easily opened with one hand.If we are dealing with large hatches, which weighs more than 10 kg, the motor and other components of the automatic system will be really useful.

In some cases, the door to the basement is a simple wood box small thickness, which can be easily lifted by two holders.

Thus, the complexity and scope of work is determined solely by us.There is no doubt that the cellar should really have a hatch that will keep housing from moisture and other negative influences.