Instructions - How to build a fence made ​​of profiled sheet

Modern practical owner of the land, for which the economical investment of money in the construction of matter, could well make a fence with their hands.With a small building skills and the right tools, it will be easy to build.By the way also suggest reading about the suspended gate with their hands.

times when the fence of mesh netting, to meet the demands of a country site master long gone.Who is trying to build parts of a durable enclosure that creates a sense of security and reliability.The construction market offers a different material for the fence construction.This brick, and wood and stone.Given the cost and time, it is better to stop the choice on the fence made of profiled sheet.It meets all requirements for dacha fences:

fence Advantages of profiled sheet

1. Country area should be protected not only from prying eyes, but also from unwanted cats and dogs;
2. fence height in the garden the standards are not more than three meters;
3. fence made of profiled sheet may be a seven-meter height, but it is only in agreement with the neighbors.It is impossible to climb through it;
4. sheeting serves as a reflecting screen and external sources of noise will be reduced considerably;
5. Decking - strong and durable material.A single metal enclosure design of it has high stability and reliability.It will last for decades with minimal care, if you it will sometimes be cleaned from dust and dirt.The polymer coating extends the life of up to 30 years or more;
6. Different colors of the polymer coating steel sheet will allow you to choose to your taste, based on the color of the roof of your house;
7. Thanks to a clear geometric lines, a fence of corrugated board has a noble appearance, worthy of fulfilling its aesthetic function;
8. And what is important for you - to install a fence, you can own, without the experts, in a short time.

fence made of profiled sheet with your hands can be made cost-effective and convenient way - without a foundation, that is, without concreting.More expensive, but major option - it is the erection of a fence with concrete foundation.His consider.

fence construction technology of profiled sheet

Let's start with the selection of profiled sheet.This takes into account the kind of coverage, that is galvanized or coated.coated sheeting is preferred for the fences, as he has protective properties is much higher.A saturated color pigment makes the material especially attractive.The coating can be either unilateral or bilateral.

fences suitable for trapezoidal sheet marked "C", quite brand C8.GOST 24045-94 - the perfect choice.metal thickness must be at least 0.5 mm and the corrugation height not exceeding 21 mm.Set overlapping sheets (100 mm), and corner trimmed.It is counted in the material.fence placement should not be contrary to the documentation zemlestroeniya and privately requires the consent of neighbors in the height of the fence and its external appearance.

Agreeing the height of the fence with neighbors, make measurement of the perimeter area.It is better to take advantage of the drawing, which shows the height of the fence, gates and gate location.If the terrain with differences in height, the decking is installed in steps of 100-150 mm.

When measuring site do layout for the installation of poles, which is suitable for pipe profile 60 x 60 mm, wall thickness 2 mm.The pillars can be made of brick, but the installation time and cost will be much higher.The number of columns depends on the distance between them.Step three meters.First, establish the extreme poles.

Then prepare pits for columns.Hand drill, and better prepare benzoburom hole diameter of 200-250 mm and a depth of 1.5 m, sleeps gravel 20 cm. With the level of time to install poles.Wood or metal spacers fix the poles and fill the hole with concrete (one part cement and four parts coarse sand, gravel four parts and four parts water).You can buy ready-made mixture, as long as it was quality.Check the columns on the vertical, until the solution is not seized.

Three days lag welds (welding operations are best left to a specialist), which are profiled steel pipe cross-section of 40 * 25 or 60 * 40.Two cross members will be sufficient if the fence height not exceeding 2 m. The distance between them should not exceed half of the sheet.If the height of 2 m, then in the middle add another bar.All metal chassis parts for durability cover with primer and enamel paint for the second time.

Now proceed to install sheets of profiled sheet on the joists.Installation of the first sheet is responsible, then you only need to monitor the level.Fasten roofing sheets with screws of the same color, length 19 mm, with press washer.Special EPDM gasket seals the opening of the screw, trapezoidal sheet protecting against corrosion.They need to be screwed at a distance of 25-35 cm in the hollow profile, ie through a wave.From the earth to recede 10-15 cm and fasten lap.damage can be formed on the cover when installing.The paint is suitable color in the can help to eliminate the shortcomings.Since the trapezoidal sheet at the edge sharp, use gloves.

work done you will certainly raise your self-esteem and appreciate the result.You will not only save a good portion of the money, but also make a significant contribution to the improvement of your site.Also read about the construction of the fence slabs with their hands, as well as about the gate of the gate of corrugated board with their own hands.

Video - a fence made of profiled sheet with his hands