Sanding the parquet with his own hands - turn-based technology

Before you begin, you need to clean the floor well.It should not remain dust, dirt and small debris.When sanding the floor with the first layer will be removed.To do this you need a special tool.Buy a belt sander can be in the hardware store: Of course, you can do the same with sandpaper, but it will take a lot of time and effort.Buying grinder, buy along with removable tape for her.

Working with floor Wear soft socks.If your feet will be shoes, you will scratch the finish.In this case, the work will have to start all over again.Do not use the slippers even with seemingly soft sole, as they are the same harm the unprotected surface.

sanding the parquet with his own hands

need to close the doors in the room before sanding the floor.At work is a lot of dust, so it is best to wear a respirator.The doors closed in order to prevent dust from work was not included in the hallway and other rooms.it will be difficult to clean with the carpet.When working with the machine you should not be hanging clothes, the machine can tighten it at work, the same goes for the hair and beard.

sanding should be done along the wood.See where directed fiber material, and move in the same direction.Otherwise you break the structure of the tree, and scraping do well you will not succeed.

typewriter is carefully followed.Do not press down on it to no indentations in the floor.Getting rid of them will be extremely difficult, if not impossible.

machine for grinding parquet

working with grinder, not hook wire.Otherwise, it will be damaged, and the likely risk of a short circuit or electric shock.If the machine found on the wire, turn it off from the network and check the wiring.If necessary, it is possible to insulate a special adhesive tape.

If the floor is wooden, it is desirable to align it before work, eliminating the "step".

perfectly flat floor is extremely difficult to achieve, it is not necessary.The main thing - to make it smooth, and it was a nice walk.

To align the boards first use sandpaper number 40. It has a large polka dots and copes well with irregularities.

When using coarse sandpaper to approach the work with care.Do not let the machine fit tightly to the floor.It is best to keep it a bit on the weight.

After the boards are aligned swings can move on to their processing sandpaper with a fine grain.For this purpose suitable number 80. These skins are cleared very quickly, because of this, they have to be changed frequently.

complexity of the work depends on from what your made of wood flooring.If it is soft rock, it is easy to work with them if hardwood flooring, it will require significantly more power.From knots impossible to get rid of.Achieve perfect smooth boards you fail anyway.It is not necessary, since minor irregularities can be formed at the stage of processing of lacquer.

wooden floor scrape much easier than parquet.

Features sanding parquet flooring

Sanding and scraping - not the most complex procedure, but it may require certain skills, and you definitely need a special tool.Most often it is a variety of grinders.They are not necessarily buying.Many shops rent construction tools for rent, so it's best to take advantage of this service.It will save you money when compared to buying equipment that you need only once.For garbage collection is best to rent a building and a vacuum cleaner.

1. Before you get started, you'll need to free up room on the furniture, standing on the floor and remove the plinth.
2. With scraping machine you will need to remove the old paint from the floor surface.It fades occasionally, is damaged and simply prevents access to the flooring.
3. The drum machine is necessary to put sandpaper number 40. When working to move perpendicular to the flooring installation lines.Do not remove a layer at a time greater than 3 mm.
4. After this stage grinding is completed, you need to pass along the parquet floor flat sander.Your task is to make the floor smooth and flatten it as much as possible.sandpaper no need to gradually increase.Starting, for example, to the fortieth, after go the sixties, until you get to the hundredth.

machine for grinding parquet

These tools do not give you the opportunity to work in the corner.Shoot parquet not necessarily.Arm grinder for working with angles.Before you do something, zashpaklyuyte gap.To make a place plastered invisible, add filler parquet dust.Then it will be the same color as the floor.

When the putty dries, you are ready to further work.

you need to treat the place leveled sander, sandpaper seasoned number one hundred.Before varnishing, remove all debris with a vacuum cleaner construction.It is powerful enough, so on the floor should not remain even dust.

process of applying varnish to the floor

Varnish is applied in three layers.Do not hurry.The first layer of varnish should dry thoroughly, only then can be applied to the second layer.When the second coat dries, cut the floor using a sander, sandpaper seasoned with fine grain.Remove the dust and apply a third coat of varnish.

Video - planing flooring, as well as the full cycle of works related to the repair of parquet