Liquid Nails for plastic panels , whether they can replace ordinary nails ?

Introduction to

material Liquid Nails - a kind of construction adhesive.It differs from the conventional in that it comprises a small fraction consisting of filler, which makes it possible to glue items that do not fit snugly.The shelf life of the adhesive - one year.

There are two types of this substance:

• Neopropelenovye - based on the organic solvent.They are harmful to human health, have a pungent smell, which persists for several days after application;
• Acrylic - this type of glue is not dangerous to humans, environmentally friendly.Only used for porous material and does not tolerate moisture.

used liquid nails for bonding plastics, wood, plasterboard, ceramics, glass, aluminum, caps.So, often mounted on a plinth liquid nails or plastic panels.Also, the adhesive used for sealing showers, bathtubs, air vents, cracks in the wall, sinks, door frames, corner joints.

Note!Despite the fact that liquid nails can be used as a material for sealing, it is not their primary task, so it is used for this purpose adhesives.

How to use liquid nails for the plastic panels?

Mount plastic panel is easy if you use liquid nails as fasteners.For they are firmly stuck to the wall, the surface should be clean and level.If you do not carry out such preparatory work, then after a while the glue joints will crack.Once the wall is leveled and primed, liquid nails will hold firmly.

necessary to sustain 30 minutes at the temperature that is maintained in the room, and their surface is cleaned of dust and moisture before the start of panel mounting.After that, the tube is cut with a glue nozzle, screwed cap, which is cut at an angle of 90 degrees.The prepared tube installed in the building gun.Liquid nails should be applied at a temperature not exceeding 35 degrees Celsius.The adhesive is applied in dot or stripes.Drying time is 15-20 minutes, completely dry - by up to three days.

Note!Plastic panels in the liquid nails must be fixed in areas with moderate humidity.

All the pros and cons

Liquid nails for PVC, as well as any other material, have their advantages and disadvantages.Before choosing this glue-like material for use, it is necessary to know all the pros and cons of the material to make the right choice.Let's start with the advantages:

• They do not cause damage to the work surface and is not subject to corrosion;
• Fast setting;
• Possibility to glue almost any material;
• For bonding is not necessary to carry out the work drums;
• Acrylic nails are clean, but on the basis of natural solvents - hardy.

Disadvantages following:

• Liquid nails based on organic materials have a high chemical aggressiveness.Working with the adhesive must be thoroughly ventilate the room;
• Repaired several days kept the acrid chemical odor, as well as highlight some of the harmful substances.In this regard, for liquid nails must be used and the respirator mask.

Knowing about all the advantages and disadvantages of this material is possible to accurately determine the order, whether the adhesive is suitable for the work to be performed.Note!When working with liquid nails need to comply with all safety rules and ventilate the area.