Pizza oven with his own hands

most delicious pizza and fragrant crispy bread baked in special ovens Pompeii, which were invented in Italy.They are distinguished by a domed vault barrel-shaped or spherical shape and built of high-temperature resistant materials.This article will set out all the details of construction and are given step by step instructions of basic work to get a real pizza oven with his own hands.

For clarity will be given photos andvideo materials, which will help to carry out the most important points of which will depend on the functionality of the building.

Laying the foundation and stand

Pompeian pizza oven has a small size, but fairly heavy weight, so special attention should be paid to the correctness of the process of laying the foundation.

The size of the base of the stand is necessary to dig a ditch, having gone deep by 40 cm, and its good ram.The bottom of the trench, it is desirable to fill with gravel or crushed stone, which fit plastic film.

of boards made formwork for the size of the foundation.Laid reinforcing mesh, which is filled with a thick layer of concrete mix.Carefully leveled surface is covered by a protective film and left until complete solidification within a few days.

then are building a stand under the pizza oven with wood.For this purpose reliable concrete blocks.The front panel does not spread to have a place for storing firewood.

This is followed by phase of the countertop.Made formwork, the bottom of which is covered with moisture resistant plywood boards and polyethylene.Sets the reinforcing component and filled with concrete solution.

attain to the level surface, covered with foil and left for about 14 days of hardening.

Walling and dome

construction of the furnace for the pizza starts with putting some hearth of refractory bricks and special solution with chamotte clay.From the edge of where the entrance will be located in the furnace is necessary to pull back about 30 cm.

then erect a wall separating flue required height, leaving the connector at the inlet.in a couple of brick walls is better to make the thickness to impart greater strength for the installation of the dome.

Before the construction of a spherical vault produce a template support the desired shape of the boards and plywood.A template is attached to the upper row of the furnace walls.Over it is laid brick dome.To give the necessary form in the joints inserted wooden pegs and thoroughly smeared with a solution.

When the solution completely freezes, the template is removed carefully.After that is laid back wall of the oven for pizza from a brick and executed entry clearance into the combustion chamber.

On the dome of the chimney is required to set a metal stainless steel tube.At the end of the process, the entire structure is smeared with a thick layer of refractory clay for long-term retention temperature.

notes construction

This article has been listed milestones and disclosed all the questions about how to build Pompeii pizza oven with his own hands.The main requirement to observe the sequence of the process and maintain the necessary intervals for complete solidification of concrete and clay solutions.

If you do not fulfill these conditions, the construction of the result may disappoint unpleasant.furnace installation on the table, can be made only after a few weeks, when all the design elements of high strength gain.Otherwise a countertop can crack and cause damage to the body of the entire product.

armed with important information, how to make a pizza oven, you can safely get to work and apply their knowledge in practice.

furnace construction Videos pizza with his own hands